 |
01-08-2008, 06:40 PM
|
#1
|
Juried Member
Joined: Feb 2007
Location: Victoria, BC, Canada
Posts: 23
|
Ive never experienced any problems with masonite. When I first started experimenting with oils, I painted on masonite panels, primed with an alkyd primer on both sides, had no problems with paint pealing, no warping, no fraying edges, chipping, none of that, and that was ten yrs ago and those pieces are still in great shape, theyve been roughed up, moved about by movers many times and not even a buckle or a scratch! Perhaps the priming is the key? especially the edges!
|
|
|
01-08-2008, 08:51 PM
|
#2
|
Juried Member
Joined: Dec 2004
Location: Scottsdale, AZ
Posts: 388
|
There is an abundance of information on grounds in the archives. Type "masonite" in the search dropdown and you will find most of them.
The following thread will be very helpful:
MDF (Medium Density Fiberboard) for large art panels started by
Sharon Knettell
I have used masonite, mdf, abs and birch plywood panels in the past. I now have standardized on Dibond panels as these are the archival panels used by many museums.
|
|
|
01-09-2008, 03:20 AM
|
#3
|
Juried Member
Joined: Feb 2007
Location: Victoria, BC, Canada
Posts: 23
|
Hello Richard, do u adhere canvas to the dibond panel? Ive never used dibond before. do u brace the panel when painting large pieces and what do u brace it with?
|
|
|
01-09-2008, 11:44 AM
|
#4
|
Juried Member
Joined: Dec 2004
Location: Scottsdale, AZ
Posts: 388
|
Leslie,
I apply a coat of Sherwin Williams DTM Bonding Primer directly to the surface of the Dibond panel after a good sanding with a green scrubbie to scuff the surface. I then apply 3 coats of acrylic primer (sanding in between coats) and then paint on top of that surface.
|
|
|
01-09-2008, 01:34 PM
|
#5
|
Juried Member
Joined: Feb 2007
Location: Victoria, BC, Canada
Posts: 23
|
ah I see you paint with acrylic, Richard, i guess that a whole other story. So priming with acrylic primer is out of the question for me. I think i would be more inclined to go for a more rigid surface like wood panels. I wonder if anyone has painted on dibond in oils?
|
|
|
01-09-2008, 04:00 PM
|
#6
|
Juried Member
Joined: Dec 2004
Location: Scottsdale, AZ
Posts: 388
|
Leslie,
Many fine oil artists use oil paints over an acrylic underpainting. Also, many oil canvases are acrylic gesso primed. You should have no trouble painting oils on the panels as described above.
In my post i should have used the words acrylic gesso instead of acrylic prime. My word choice certainly was misleading.
|
|
|
01-09-2008, 04:58 PM
|
#7
|
Juried Member
Joined: Feb 2007
Location: Victoria, BC, Canada
Posts: 23
|
There are so many in discrepancies when it comes to oil painting over acrylic gesso or acrylic primer, an alkyd primer would be a better choice. This of course was based on an article I read at the art renewel site written by Virgil Elliot
|
|
|
Currently Active Users Viewing this Topic: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
All times are GMT -4. The time now is 02:41 PM.
|